MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work with UHF VHF Ethernet Cable Support C4FM YSF NXDN DSTAR P25 DMR
Product description MMDVM Hotspot is an easy, convenient and ready to use Multi-mode Hotspot that supports C4FM YSF NXDN DSTAR P25 DMR Base Setting: Power On and Wait for 2-3 minutes Connect to Pi-Star-Setup(pi-star)/SSID/PASSWORD: raspberry http://192.168.50.1/admin/configure.php MMDVMHost Configuration MMDVM Display Type: OLED Radio Freq: UHF:430-440 VHF: 144MHz-148MHz Radio/Modem Type: STM32-DVM/MMDVM_HS – Raspberry Pi Hat(GPIO) or any XXX(GPIO) http://192.168.50.1/admin/expert/edit_mmdvmhost.php RXOFFSET=0,TXOFFSET=0 (default) TIPS:OLED is no display Until you set wifi and display TYPE Login info: User:pi-star password:raspberry Set the same Frequency, Callsign, DMR ID, Color code, Repeater Slot(Time Slot Defaults 2) as Radio Mobile and WiFi Details Software:Pi-Star Note: All designs will be contributed on MMDVM open source project.
IMPORTANT NOTE: When you first time set up, MMDVM hotspot will generete pi-star set up hotspot, which you'll connect with, and goes into pi-star and then visit 192.168.50.1 for configuration. If you connected to your home network/home wifi, it will remember your home wifi. Therefore, when you open pi-star and try to update your configure, there will be no pi-star wifi. If you came across this situation, here're two methods to log in and update you configure: A, Visit http://pi-star on your browser, log in pi-star and configure. If you're on macOS, iOS or Windows 10 tablet, please visit http://pi-star.local. B, Find your Device IP on your home network routers, and log in with that IP, and update your configure. Package content:
1x OLED display (installed on board) 1x Raspberry Pi Zero W 1x TF card 1x MMDVM_HS(UHF/VHF) 1x USB Cable 1x Antenna (with 90 degree elbow)1x Ethernet CablePrice: $108.68 from AURSINC
